Process Control

Both the R42x-K401 and K402 are suitable for integration into a PLC environment with their analogue output module and expandable I/O :

• Built-in RS232 serial communication
• Optional RS485 networking

Precise Analogue Output Module

• Analogue Output 4-20mA or 0-10V with 1/65,000 resolution (optional module)
• Output isolated to resist system noise and interference therefore reducing unnecessary callouts
• Precise with a 400Hz (2.5msec) update rate

Robust Input/Output Modules

• The indicator can be configured with up to 32 I/O. (optional modules)
• Direct connection between I/O points is supported.
• Outputs are isolated to resist system noise.
• These high side (400mA current source) drivers are capable of driving low voltage actuators directly or can be connected directly with PLC controllers.

The 5000 with its analogue output module and support for common industry standards used in process control make it suitable for system integration:

• RS232 and RS485 serial outputs
• Modbus ASCII
• Analogue Output 4-20mA or 0-10V with 1/65,000 resolution (optional module)
• Isolated digital I/O (4 in/4 out) (optional module)

The 1203 weight transmitter is an economical, robust instrument that provides fast and accurate weight readings with an onboard analogue output that makes it suitable for connecting to PLCs.

• RS232 and RS485 serial outputs
• 2 Isolated low side driver outputs and 1 isolated input
• Analogue Output Configurable (4-20mA, 0-24mA, 0-20mA, –10-10V, 0-10V, 2-10V, 0-5V, 1-5V) with 1/65,000 resolution
• 100Hz (10msec) update rate