Filling

The 2100 is ideal for basic filling applications:

• Single material, two speed filling and dump built in.
• Three (3) control points can be configured independently as either inputs or outputs.
• Negative target for weigh out applications.

Additionally a relay module can mount directly onto the rear of the instrument housing; no cabling or external power required. It offers:

• Three (3) voltage free relay outputs
• Outputs are independent and isolated
• Rated to 250VAC and 8A
• Normally open (N/O) and normally closed (N/C) contacts

The K410 is for single material filling applications such as dosing, bagging and silo discharge. It uses three set batching stages: fill, dump and a finish stage.   For safety there is support for interlocks and enables.  For example when the batch interlock is used it must be active for  the duration of batching process otherwise the process will halt.

The K411 can be used for a range of applications from basic filling through to complex multi stage batching. The predefined applications are an excellent starting point for quick setup of filling applications. The K411 provides extra flexibility for more complex filling applications; it is expandable up to 32 I/O for fill control and interlocks or delays for example. There is thumb wheel support for quick product selection.

Both the K410 and K411 support:

• Negative batching allowing for material to be batched out of the same vessel that has been filled
• Timer based multiple batching that uses the Real Time Clock to control the batch timing for time based batching.
• Batch suspend where a Suspend function key can be set that will pause the batch and adjust the tare weight when resuming the batch.